Eneroil Offshore

Eneroil Float Equipment namely Float Shoe and Float Collar are used to guide the casing to set in the hole which ensures the quality of cementing. Float equipment from Eneroil Offshore is generally used in the lower section of the well to help decrease strain on the derrick while directing packaging past edges and bog zones in the opening. The float shoe and float collar manufactured by Eneroil use the spring driving back-pressure valve type and are very reliable. The material used for float shoe is PDC Drillable. The upper end of the float shoe is connected with casing and its lower end is connected with the semi-lunar cement head. Float Collar is run in a casing assembly, usually several joints above the Float Shoe. It serves as an extra back pressure valve sealing against pressures from blow while running the assembly and after the cementing job.

Eneroil Conventional Top and Bottom Cementing Plug significantly reduce the drill out time, thereby resulting in cost saving. The Bottom Plug separates the cement from drill mud and features a rubber diaphragm which is opened once the plug has landed and latched into the Conventional Float Collar. The top plug is used as a follow-up plug to displace cement, latches into the upper end of the bottom plug after latching these provide an anti-rotational feature to eliminate rotation during drilling and save drill out time. Performance Features The Top & Bottom Plug are constructed of material selected to reduce the drill out time, there-by resulting in cost saving. The Top Plug is used as a follow plug to displace the cement and land on the upper end of the Bottom Plug. The body consists of ebonite insert molded with elastomer. This allows the drill bit to fracture the ebonite rather than tear the rubber and aluminium as with a conventional Plug thus reducing the drill out time significantly. No metal parts are used therefore the Plugs are PDC drillable.

Eneroil Non-Rotating Top and Bottom Cementing Plug significantly reduce the drill out time thereby resulting in cost saving. The Bottom Plug separates the cement from drill mud and features a rubber diaphragm which is opened once the plug has landed and latched into the Anti-Rotational Float Collar. The Top Plug is used as a follow-up plug to displace cement, latches into the upper end of the bottom plug after latching these provide an anti-rotational feature to eliminate rotation during drilling and save drill out time. Performance Features The Non-Rotating Top & Bottom Cementing Plugs are designed to decrease drill out time. No metal parts are used therefore the Plugs are PDC drillable. Options The Non Rotating Cementing plugs are available in sizes 4 1/2″ to 20″ Options available in Non-Rotational Top Cementing Plug & Non-Rotational Bottom Cementing Plug as per requirement. Eneroil Non Rotating Cementing plugs are available in NR,SBR,NBR and HNBR grades