Requirement
• Diploma in Engineering or equivalent with minimum three (3) years’ work experience with any CMMS and Preventive Maintenance or Work Order module in Oil & Gas Industry.
Kindly send your updated resume to [email protected] before or on 22 Nov 2021. Only short listed candidate will be contacted.
Requirements:
- Degree in Engineering or equivalent with minimum five (5) years’ work experience with any CMMS and Preventive Maintenance or Work Order module in Oil & Gas Industry.
Requirements:
- Must have minimum Bachelor’s degree in Engineering, Geology, Petroleum or Science discipline;
- Minimum Ten (10) years of Oil and Gas Industry experience with at least Seven (7) years of drilling and well construction experience, and minimum Four (4) years of well control exposure;
- Attended Extended Reach Drilling (ERD), Stuck Pipe Prevention, Well Control and other Well Operation and Intervention courses;
- Extensive experience in drilling optimization, FEWD response plot, evaluate FEWD and mud logging data;
- Good knowledge of well control techniques, e.g. warnings sign, kick detection, hole cleaning and etc;
- Capable of providing comparative performance analysis of offset wells or rigs with opportunity for inefficiency and performance development.;
- Able of identifying workflow enhancement opportunities, data visualization solutions and develop simple tools for these purposes in Excel, MS Power Platform or Python;
- Skilled in data processing: clean, transform, manipulate, merge and engineer data from different sources; and
- Have excellent command of English language in both speaking and writing.
Requirements
- Must have minimum Bachelor Degree in the Engineering, Geology, Petroleum or Science discipline;
- Minimum Twelve (12) years of Oil and Gas Industry experience with at least Eight (8) years of practical well delivery optimization experience, and minimum Five (5) years of experience in using
- Engineer’s Data Model (COMPASS, WELLPLAN, OpenWells) suites or equivalent that provide comprehensive set of engineering tools for analysis, well planning, modelling, and well operations, optimization;
- Attended Extended Reach Drilling (ERD), Stuck Pipe Prevention, Well Control and other Well Operation and Intervention courses;
- Competent with Bottom Hole Assembly (BHA) analysis, torque and drag, well planning, whirl, hydraulics modelling and management and well bore integrity;
- Experience in supporting drilling operations and provide intervention for early warning on any anticipated down hole problems;
- Extensive knowledge of drilling optimization, FEWD response plot, evaluate FEWD and mud logging data;
- Good knowledge of well control techniques, e.g. warnings sign, kick detection, hole cleaning and etc; and
- Knowledge in Surface Data Logging (SDL), Logging While Drilling (LWD), Pore pressure determination, log interpretation, sensor theory, and proficiency in all software applications used in the field.
- Able of identifying workflow enhancement opportunities, data visualization solutions and develop simple tools for these purposes in Excel, MS Power Platform or Python; and
- Have excellent command of English language in both speaking and writing
Requirements
- Must have minimum Bachelor Degree in the Engineering, Geology, Petroleum or Science discipline;
- Minimum Fifteen (15) years of Oil and Gas Industry experience and have extensive knowledge in drilling operations, Formation Evaluation while Drilling (FEWD) response, wellbore stability and performance;
- Minimum Eight (8) years of experience in using Engineer’s Data Model (COMPASS, WELLPLAN, OpenWells) suites or equivalent that provide comprehensive set of engineering tools for analysis, well planning, modelling, and well operations optimization;
- Attended Extended Reach Drilling (ERD), Stuck Pipe Prevention, Well Control and other Well Operation and Intervention courses;
- An expert in RTO technologies, and client business and operational processes within a System;
- Demonstrates expert knowledge of system specific technical computing environments including database, network, operating systems, data management, architectures and hardware;
- Demonstrates a comprehensive knowledge and understanding of all call management support and service level guidelines, so as to provide recommendations on improvement. Provides coaching to Customer/contractor staff analysts on processes;
- Able to contribute to Best Practices in project delivery and set project objectives and priorities, as well as set milestones;
- Has developed project management skills and is capable of leading project teams of up to 20 people;
- Able to contribute to performance by challenging rigs on different approaches to operations to improve performance;
- Able to identify workflow enhancement opportunities, data visualization solutions and develop tools for these purposes in MS Power Platform or Python. Additionally, for more complex digital analytics projects, leading software development or data science teams for such outcomes;
- Able to explore and test data for insights with data science techniques with skills in MS Power Platform and Python and work with data scientists on more complex machine learning or AI solutions; and
- Have excellent command of English language in both speaking and writing
Kindly send your updated resume to [email protected] before or on 22 Nov 2021.
Only short listed candidates will be contacted.
Requirements:
- Must have minimum Bachelor’s degree in Computer science, MIS/IT, Math/Statistics, Engineering or Science;
- Minimum Four (4) years’ experience in software application development in upstream oil and gas industry.
- Experience in developing cohesive overall design strategy & assess design solutions against user requirements;
- Skilled in one or more object-oriented programming languages (e.g. Python, R, or others); Excel, Power BI and basic web programming (CSS & HTML);
- Skilled in data manipulation / processing: clean, transform, manipulate, merge and engineer data from different sources; handle all types of data (e.g. streaming, structured, unstructured data);
- Familiarity with database and application programming interface, including WITS/WITSML data structures & protocol;
- Good understanding of software engineering best practices including technical design, version control (using Git), testing, and documentation;
- Knowledge and understanding of modern development methodologies: Agile using Scrum and/or Kanban; and
- Have excellent command of English language in both speaking and writing
Requirements:
- Must have minimum Bachelor’s degree in Computer Science, Math/Statistics, Engineering or Science;
- Minimum Six (6) years’ experience in designing, prototyping, deploying, and maintaining scalable data science solutions in upstream oil and gas industry;
- Excellent analytical, interpersonal and communication skills, and able to interact and influence others;
- Experienced in deriving actionable insights from data and quantifying business impact;
- Able to apply various data science techniques (statistical analysis, machine learning, and pattern recognition and data visualization) along with domain knowledge and subject-specific models to solve scientific, engineering & operational problems;
- Skilled in one or more object-oriented programming languages (e.g. Python, R, or others); Excel, Power BI and basic web programming (CSS & HTML);
- Skilled in data manipulation / processing: clean, transform, manipulate, merge and engineer data from different sources; handle all types of data (e.g. streaming, structured, unstructured data);
- Familiarity with database and application programming interface, including WITS/WITSML data structures & protocol;
- Good understanding of software engineering processes including version control (using Git), testing and release cycles;
- Knowledge and understanding of modern development methodologies: Agile using Scrum and/or Kanban; and
- Have excellent command of English language in both speaking and writing.
Job Requirements:-
- SPM Qualification or equivalent.
- Minimum 3 years relevant working experiences in using Microsoft Office 365 in Oil & Gas industry.
Job Requirements:
Diploma in Engineering or equivalent.
Minimum 3 years working experiences in any CMMS and Preventive Maintenance or Work Order Module in Oil & Gas industry.
If interested to apply, please email your resume to [email protected] or / email to [email protected] before 23 Nov 2021.
Only shortlisted candidates will be contacted.
Thank you.
Job Requirements:-
- Degree in Engineering or equivalent.
- Minimum 5 years working experience in any CMMS and Preventive Maintenance or Work Module in Oil & Gas industry.
Main Functions:-
Evaluate and comment on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with project specifications, company standards, and regulatory requirements. Facilitates effective execution of discipline engineering and design routines that align with the project's goals, objectives, and procedures. Assures accurate and timely communication among the Project Team and other Company functions on discipline engineering activities, progress, and issues. In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills.
Tasks and Responsibilities:-- Responsible for the stewardship and completion of technical and business evaluations to address obsolescence issues and reliability improvements of EMEPMI turbomachinery equipment control systems – Turbine Control Panel (TCP), package Fire and Gas and Anti Surge Control systems.
- Responsible for the stewardship and completion of retrofit projects from conceptual studies, engineering, procurement, hook and commissioning and start up.
- Lead and coordinate the development of the necessary project deliverables (project objective, scope, schedule, cost estimates, project execution plans, etc.), secure stake holder approvals and lead the overall project coordination within EMEPMI Asset and contractors’ project team.
- Coordinate periodic obsolescence reviews with turbomachinery OEMs and steward obsolescence management strategies. Serve as a conduit for Machinery Technical Team to engage and escalate issues to turbomachinery OEMs.
- Ensure contractor’s work follows accepted practices, conforms to EMEPMI specifications, meet the expected quality and the overall project objectives.
- Participate in the installation of the new machinery control systems, including witnessing key installation steps, participate in the hook up and commissioning activities offshore.
- Develop maintenance and repair strategy for the existing obsolete and new control systems.
- Coordination and communication of various issues among the company's and contractor's engineering team that affect the discipline engineering design, safety, and regulatory compliance of the work.
- Evaluate / comment work performed by the Contractor and sub-contractors to ensure that the work is being executed in accordance with project specifications, company standards, and regulatory requirements. Includes review of discipline design drawings and documents.
- Steward discipline engineering queries from the Contractor and sub-contractors as well as technical information requests.
- Keep Lead Engineer or Engineering Manager informed of discipline engineering progress, deviations, and execution concerns.
- Participate in discipline engineering reviews at Contractor's and subcontractor's locations
- Drives and promotes capital efficiency in engineering design.
- Support internal engineering general interest or Global Practice initiatives as requested by Supervisor
- Analyze maintenance records to determine instrument failure rates, availability / reliability calculations, bad actor / failure modes identification, and program effectiveness / cost analysis.
- Develop and execute process control surveillance programs.
- More than 10 years' experiences in DCS, SDS, Turbo Machinery Control Systems, Fire and Gas are preferred.
- Bachelor’s degree in Electrical or Electronics or Mechatronics Engineering or related engineering specialty, or equivalent professional experience.
- Strong knowledge of discipline design standards, specifications, codes, and appropriate safety criteria.
- Experience in selection, application, and ISA data sheet specification of hardware including pressure/ temperature /level instruments, control valves, shutdown valves, and fire/gas detection.
- Proficient in data collection and analysis with common database and software data analysis tools such as SAP, Analytics for Excel and Tableau.
- Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities.
- Proficient in Microsoft Office suite of software programs.
- Read, write, and speak fluent English, especially as it applies to technical and business communications.
Main Functions:
Purchases spot equipment, materials, chemicals/catalysts, and service requirements for multiple business lines. This position level would typically include junior Buyer performing mostly tasks that do not require prior extensive experience.
Tasks and Responsibilities:- Familiar with SAP and Ariba.
- Effective computer skills (email, excel, words).
- Manages portfolio of agreements and new requests, enabling efficient and effective purchase of goods and services (from purchase to pay) with a focus on business value, on-time delivery, and cycle time.
- Liaise with suppliers, price negotiation, monitoring vendors’ performance.
- Negotiates contract pricing and terms & conditions directly with suppliers while working with internal stakeholders, seeking lowest total system costs and appropriate mitigation of supply and legal risk.
- Executes procurement processes in full compliance with Sourcing & Acquisition Handbook and CIMS (Controls Integrity Management System) catalogs and managing scope updates, pricing, Exhibits, amendments.
- Fresh graduates are encouraged to apply.
- Behavioral Skills: adapts, analytical, collaborates, communicates effectively, focus on customers.
- Functional Skills: PtP (Procure-to-Pay) knowledge, system utilization & efficiency, total system cost, apply controls mindset, application of business & procurement technical knowledge, service excellence, contract development, contract management, negotiating and influencing, relationship management.
Main Functions:
Oversees and supports aviation activities and provides management with advice and guidance required to achieve safe, efficient, and effective aviation operations in country.
Tasks and Responsibilities:- Oversee daily aviation operations at airport and offshore facilities to ensure that all operations are conducted in a safe and cost effective manner
- Manage and steward aviation contract
- Provide Airbase Supervisor with technical support / guidance on all technical matters
- Maintain liaison with other PAC, Airport Authorities, CAAM, MMEA and government officials, as appropriate.
- Conduct regular reviews of helicopter operator operations.
- Experience in Helideck standards & management
- Preferably CAAM endorsed Helideck Inspector or CAAM HCC Committee member.
- Bachelor Degree in Engineering or ATPL equivalent.
- 10 years’ experience as Aircraft Engineer or Offshore Pilot.
- 5 years’ experience in managing or advising offshore aviation operations.
- Broad knowledge of aviation operations.
- Knowledge of International Civil Aviation Organization (ICAO) and local civil aviation agency (CAA) regulations specific technical skills.
Job Requirements:
- The jobholder should hold a Bachelor's Degree or Diploma in Engineering or Computer Science.
- For coordinator the job holder should have certificate or higher in any related field, with minimum experience of fifteen (15) years in design engineering and practical experience in upstream oil and gas industry.
- For engineer role the jobholder should have degree in any related field, with minimum experience of seven (7) years in design engineering and practical experience in upstream oil & gas industry.
- Minimum of 5 years in engineering projects including at least 2 years in the development of PDMS specifications and use of PDMS for engineering projects.
- Strong knowledge in 3D Modeling which include but not limited to structural, architectural, piping, electrical and instrumentation, HVAC, pipeline, safety and maintenance space.
- Experience in Database creation, maintain and troubleshooting of PDMS database.
- Experience in managing and operating of Plant Design Software.
- Responsible and accountable for the PDMS deliverables which also include PDMS Project Database and as-built deliverables.
- Should be able to work in team environment.
- Ability to work in team environment and good communications skills, both oral and written.
If you are interested to apply, please email your updated CV to [email protected] or / email to [email protected] ASAP before 11 Nov 2021.
Only shortlisted candidates will be contacted.
Job Requirements:
- The jobholder should hold a Bachelor's Degree in Engineering, Business or Commercial, quantity surveying or cost engineering preferably membership of a Professional Body.
- Cost Engineer/Cost Controller minimum 8 years of working experience in the oil and gas industry particularly, in key Cost Engineering roles, throughout all project phases from Appraise to Execute.
- For general cost controller, minimum 6 years working experience as cost controller in Oil & Gas upstream Operations or minimum 10 years of combined experience in Finance & Accountancy, Quantity Surveyor and Cost control type background in Oil & Gas upstream Operations.
- Experience in managing and administrating capital budgets and expenditures for offshore oil and gas capital development projects, inclusive of monitoring and forecasting progress and performance of multiple major contractors.
- Experience in preparation of annual budget, WP&B, internal budget reforecast, generation of AFE and ABR, handling of queries from JV Partners, PETRONAS and Auditors.
- Experience in managing and administration the computerized cost management system, e.g., PCIS, and good understanding of Finance system, account and project coding system.
- Ability to keep track of project expenditures, preparation of Purchase Requisitions, and recording of all project transactions into the PCIS system.
- Understanding the cost estimation and CAPEX phasing.
- Preparation of all Cost Reporting, inclusive of AFE/ ACV status, weekly and monthly project reports and presentations materials.
- Proficient computer skills with modern day PC applications packages. Knowledge of Questor is preferable.
- Knowledge of the Malaysian Law and PETRONAS regulations will be an added advantage.
- Excellent supervisory, communication and presentation skills including oral and written reporting and organization management.