Job Description
Complete Marine Controller Joining Checklist and / or any operation requirement as instructed · Review and approve standard operating procedure. · Prepare, review, and approve anchor patterns. · Review and approve passage planning for towing. · Conduct pre-execution meeting (e.g: anchor handling, pre - rig move, etc) · Provide recommendation on towing operation.
Kindly send cv to [email protected]
Job Describtion
Degree in Engineering from a reputable
local/overseas university/ higher learning
institution. - At least 3 years working experience in the area
of engineering, preferably in the oil and gas
industry. Inventory or Materials Management
experience is an added advantage.
- Strong interest in System Related Initiatives as
a means to continuously improve work
processes. Previous experience using AP
Materials Management (MM) module under
RP2 (Central) and XP8 (Local) platforms. or
other ERP system is an advantage.
- Strong analytical skills, dynamic, flexible and
able to work independently with minimum
supervision.
Kindly send cv to [email protected]
Job Describtion
Hazardous Area Ex Equipment Inspections and verification of Ex equipment compliance to standard•Development of Ex register •Possible rectification of non-compliance findings (such as gland loose, etc.) •Development of Ex inspection procedure for regular inspection program•Onsite Training for local staff (if required
Kindly send cv to [email protected]
Job Describtion
Knowledge:
University degree in Mechanical Engineering, Petroleum Engineering or other relevant engineering degree
with a drilling background
Experience:
Min of 8 years of offshore drilling experience in the Oil & Gas industry including PMCD drilling operations.
The candidate should have offshore drilling experiences in particular jack-up and semii-submersible/floater
drilling rig with at least 3 years working experience in South East Asia.
Skills:
§ Planning and Organizing skills
§ Communication skills
§ People Management skills
§ Update on new technology, models and equipment
Kindly send cv to [email protected]
Job Describtion
Knowledge:
University degree in Mechanical Engineering, Petroleum Engineering or other relevant engineering degree
with a drilling background
Experience:
Min of 8 years of offshore drilling experience in the Oil & Gas industry including PMCD drilling operations.
The candidate should have offshore drilling experiences in particular jack-up and semii-submersible/floater
drilling rig with at least 3 years working experience in South East Asia.
Skills:
§ Planning and Organizing skills
§ Communication skills
§ People Management skills
§ Update on new technology, models and equipment
Kindly send cv to [email protected]
Job describtion
Mandatory Requirement (Certificates & Competency) 1. Minimum requirement for manpower are valid Chargeman A4 certified by Energy Commission (Suruhanjaya Tenaga) 2. Valid OSP/OSIS, CCC, Sarawak working permit, PTW Level 2 and H2S training and equip with basic H2s kit
Kindly send cv to [email protected]
Job Describtion
Mandatory Requirement (Certificates & Competency) 1. Certified Ex Inspector IECEX 003,004 & 007 2. Valid OSP/OSIS, CCC, Sarawak Working Permit PTW level 2 and H2S training and equip with basic H2s kit
ptw awareness level 3
Kindly send cv to [email protected]
Job Describtion
Diploma or Vocational Certificatein Electricalor equivalent with minimum 3 years’ relevant working experience in Electrical repair and maintenance in Oil & Gas industry
Kindly send cv to [email protected]
Job Describtion
Degree or Diploma in Electrical Engineering with minimum 4 years’ relevant working experience in Electrical repair and maintenance in Oil & Gas industry equipment
kindly send cv to [email protected]
Job Description
To perform Quality Assurance/Quality Control of all permit to Work System (PTW) in
addition to his responsibility as Approval Signatory and re-validation of all permit to work
issued for the execution of all activities including during SIMOPS.
• To perform site check and ensuring the precautious and mitigations for the jobs are
adequately put in place as stipulated in PTW and JHA. Conduct final verifications at site
that it is safe for the particular activity to proceed before PTW is approved.
• To pursue a Goal of no harm to people through implementation of the HEMP (Hazards,
Effect and Management Process) tools as applied to SIMOPS activities on site.
• Check Offshore Location/Installation, Safety/HSE Documents are available and in good
order (i.e. Job Hazard sheets, MOPO (Matrix of Permitted Operations), Emergency
procedure and Fire Fighting and Sea Survival Gears are in good order.
• Assist the project Operations Engineer in drafting Site Specific Procedure (SSP),
SIMOPS, or risk studies (i.e) QRA)
• Ensure safe working practices are observed by Contractors and Vendors. Hazards and
effective management process (HEMP) to ensure all controls and recovery measures
have been carefully assess to mitigate the risk into ALARP (As Low As Reasonably
Practicable) based on the risk assessment Matrix (RAM) adopted.
• Exercise lead by example ACT auditing and perform pro-active intervention for
Contractors to build and sustain pro-active intervention culture among Contractors.
• Support OIM (Operations installation Manager) to conduct Level 2 and Level 3 PTW
audits for locations.
• Support OIM to improve HSSE performance of Contractors.
• Assist in Pre-mobilization HSE inspections of barges, workboats, supply boats etc.
(Focus on Fire Fighting and Emergency Equipment, Gangway conditions)
• Check all offshore Contractors staff 9CAT 1/3 Workboats and Vendors) had gone
through relevant HSE training (HUET, PTW, First Aid, Fire Fighting, ACT, Accident
Investigation etc)
Working Experience:
• Minimum 6 years of working experience as Senior Operation and/or
Construction/Maintenance Supervisor or similar supervisory role.
• Minimum 10 years of working experience in oil and gas industry
• Shall have experience in managing and ensuring Permit to Work (PTW) compliance,
which include driving safety rules and policies, exercising and promoting the use of
Job Hazard Analysis and implementing accident investigation procedures.
• Must have proven track record on Job Hazard Analysis (or equivalent) and Risk
Assessment.
• Must be fully competent with Permit to Work (PTW) approval system and
management. The certified true copy of the PTW Management certificate shall be
submitted.
Kindly submit cv to [email protected]
Job Description
Qualification: Minimum a Bachelor's Degree in Engineering or Petroleum discipline
• Experience: Minimum ten (10) years experience in the oil & gas industry, of which minimum five (5) years as a Safety Consultant.
Additional requirement:
- Has atleast two (2) out of four (4) work unit experience.
- Has past experience working in Malaysia.
Kindly send cv to [email protected]
Job Description
Qualification: Minimum a Bachelor's Degree in Engineering or Petroleum discipline
• Experience: Minimum ten (10) years experience in the oil & gas industry, of which minimum five (5) years as a Safety Consultant.
Additional requirement:
- Has atleast two (2) out of four (4) work unit experience.
- Has past experience working in Malaysia.
Kindly send cv to [email protected]
Job Description
Qualification: Minimum a Bachelor's Degree in Engineering or Petroleum discipline
• Experience: Minimum fifteen (15) years experience in the oil & gas industry, of which minimum eight (8) years as an Offshore Supervisor
Additional requirement:
- Possess IWCF Level 4 certificate
- Has atleast two (2) out of three (3) work unit experience.
kindly send cv to [email protected]
Job Description
• Qualification: Possess a degree in Information Technology
• Experience: Minimum three (3) years experience in Business Intelligence using Microsoft BI tools with atleast one (1) year experience in the oil & gas industry.
Additional requirement: Possess atleast an intermediate level knowledge in Power BI and SQL.
Kindly send cv to [email protected]
Job Description
Qualification: Minimum a Bachelor's Degree in Engineering or Petroleum discipline
• Experience: Minimum seven (7) years experience as an Offshore Performance Consultant.
Additional requirement:
- Has previous working experience in Malaysia.
- Has atleast three (3) out of four(4) work unit experience.
kindly send cv to [email protected]